The BISCLIPS® Tiger is a multifunctional clip that can be used for up to 30 different applications. You can use the beam clip with steel cable, S-Hook, cable tie and threaded rod. The BISCLIPS® Tiger is suitable for fixing of electrical pipes, conduit and cable trays to treated steel girders. >>
The BIS GOLD is a steel hammer-in plug for plasterboard. Pre-drilling is not necessary thanks to the serrated point. The hammer-in plug expands and does not rotate on screwing. >>
The BIS Aero® is the first clamp in the world where the rubber lining is securely attached. Unlike other clamps, the rubber lining on the BIS Aero® is conjoined with the steel and won’t come off when sliding the spiral duct through the clamp. >>
For the support of air channels Walraven has developed a new brand of light weight rail: The BIS Aero® Rail.
>>
Walraven has developed the BIS Yeti for placing installations on flat and slightly sloped roofs. In combination with Strut Rail this product is the ideal solution for supporting climate installations, solar panels, walkways, etc. >>
Because of the smartly designed BIS RapidStrut® accessories like slide nuts, T-bolt assemblies and rail connectors, you can save more than 50% of the fixing time. The accessories are pre-assembled and “ready-to-use”. >>
Save up to 50% installation time with the BIS RapidRail® and BISMAT® system. Watch the video and experience the speed and ease of our products in comparison to conventional pipe fixings. >>
Making a screw thread gas- or watertight with Teflon tape or hemp is quite a task. You may well ask yourself: "Isn't there an easier way?" There sure is! With Tangit® Unilock. >>
The lightening-fast BISMAT® Flash clamp just got faster. A modification means that the threaded screw is easier to press through the shackle. >>
Handy to use, easy to adjust and suitable for all sizes of starQuick® clips. That's the new starQuick® Threaded rod adaptor. Secure in locations where all threaded rods are fitted. This product allows you to make substantial time savings. >>
The BIS Roofing sheet hanger was recently approved by the German insurance loss prevention organisation VdS and can now be applied to sprinkler systems. The certificate applies to all versions as well as to the version with or without a suspension nut. >>
