How to comply to fire safety regulations

Each country has its own laws and regulations about building, remodelling and renovating. This includes the fire safety requirements of the building. We would like to explain how you can meet these requirements as well as possible.

Safety first in regulation XYZfire_regulations_image1_480x470px

The Dutch government has included in the XYZ Regulation 2012 provisions on fire safety. The aim is to prevent casualties and prevent the fire from spreading to another section.

Through the increased fire protection in buildings, the people who live and work in the property have more time to get themselves to safety in case of fire. Additionally the fire department has more time to extinguish the fire, especially when it remains within a closed fire compartment.

Ask as early as possible for advice

There are various ways in order to meet the fire safety requirements, depending on the section of the property. An important tip we have for you, is to ask for advice as early as possible on the best way to increase the fire protection of your project. It still happens regularly that after the installation of fire protection systems, everything has to be replaced because a part is used which is not up to the right fire safety standard. You certainly want to avoid these kind of failure costs.

The best solution: BIS Pacifyre fire collarsfire_regulations_image2_480x470px

Do you want to make sure you optimally meet the fire safety requirements set by the government? Then we have the right fire protection systems for you. Our BIS Pacifyre fire collars
can be used to make the feed-through of plastic pipes and metal insulated pipes fire resistant.

If you have to run a pipe through a fire protected floor or wall, then it is your duty to complete the floor or wall with fire protection after you have finished. You can do this with the fire collars from Walraven. After you have installed them properly, you will comply fully with WBDBO (Resistance to fire penetration and fire spread) as part of the Building Regulations 2012.

Our BIS Pacifyre fire collars close off the feed-through in the case of fire, depending on the type, for a minimum of 60, 90 or 120 minutes. For the additional chemicals such as kit and PUR, to fill combustible insulation, we cooperate with the well-known manufacturer Henkel. We can advise you which type of fire collar is most appropriate for your project.

Do you have a question?

Ask your question
Call us

Call us +86 21 5176 0268
Email us info.cn@walraven.com

Close

Asia

Oceania

Or visit our international website.