Pacifyre® MK II Fire Sleeve (M) – Large

for pipe penetrations of insulated or non-insulated metal pipes in accordance with e.g. BS476-20, in walls (solid walls or light partition walls) and ceilings with fire protection requirements
the sleeve provides a guaranteed protection against fire, smoke and noise
expansion and contraction of the pipe remains possible

Specifications and packaging

Part No.	D (mm)	D (")	DN	d (mm)	Pack 1	Pack 2
Part No.2141213215	D (mm)213 - 215	D (")-	DN-	d (mm)237	Pack 11	Pack 2-
Part No.2141219221	D (mm)219 - 221	D (")8	DN200	d (mm)243	Pack 11	Pack 2-
Part No.2141228230	D (mm)228 - 230	D (")-	DN-	d (mm)252	Pack 11	Pack 2-
Part No.2141240242	D (mm)240 - 242	D (")-	DN-	d (mm)264	Pack 11	Pack 2-
Part No.2141267269	D (mm)267 - 269	D (")-	DN-	d (mm)291	Pack 11	Pack 2-
Part No.2141273275	D (mm)273 - 275	D (")10	DN250	d (mm)297	Pack 11	Pack 2-
Part No.2141373375	D (mm)373 - 375	D (")-	DN-	d (mm)397	Pack 11	Pack 2-

for pipe penetrations of insulated or non-insulated metal pipes in accordance with e.g. BS476-20, in walls (solid walls or light partition walls) and ceilings with fire protection requirements
the sleeve provides a guaranteed protection against fire, smoke and noise
expansion and contraction of the pipe remains possible
minimum space required, therefore can be applied in areas of hard accessibility
a higher flexibility due to minimal overhang on wall and ceiling seals
no tools, drilling or extra fixing materials needed
simple and easy to install
maintenance free
noise reduction test report from IRB (Fraunhofer Institut - Germany) available
tested according to EN 1366-3
in accordance with many EU country building regulations

Tangit FP 550 2C Fire Protection Foam
- for fire-proof and smoke-proof sealing of partitions for pipes, cables and combinations
- also for light partition walls greater than 10 cm thick
- fire-proof and gas-tight for at least 90 minutes
More information
Tangit FP 800 Fire Protection Coating
- Tangit FP 800 Fire Protection Coating is an integral part of the Tangit FP 550 2C Fire Protection Foam system
- for final coating of partitions for pipes and cables and combination partitions with Tangit FP 550
- for coating cables, cable bundles and cable trays to stop fire spreading
More information
Pacifyre® FPM
- for sealing around:
- recommended for sealing ventilation flaps, ventilation ducts and fire protection doors (leading firestop element should refer to a class A1 fire rated mortar sealant)
- can be used by hand or with a mortar gun
More information
Pacifyre® ID-Card
- for identification of pipe penetrations sealed with Pacifyre® and/or Tangit products
More information