Prevent failure costs as an installer
Not every project runs smoothly. Sometimes things go wrong and you can incur failure costs. A large part of this can be prevented, if you evaluate your project and seek advice to avoid these costs.
We are here to help.
Good planning and preparation
There are numerous ways you can be faced with failure costs during a project. This can include ineffective planning of the construction process or the need to repair and replace parts. Even end products that do not meet the agreed quality requirements can incur extra costs.
Good planning and preparation is half the battle won if you want to avoid failure costs. In brief, the right knowledge must be readily available and the details for the purchase of the correct products should be clear in advance. You could prevent failure costs from inaccurate estimations.
Consider the installation and fixing materials
An important tip is that the installation and fixing materials should be properly considered at an early stage. When it is time to install, there is no more time to quickly change the order because there is for example, a different type of connection needed than first considered. Knowing this beforehand can also help you avoid failure costs.
Involve us as early as possible
We notice that installation and fixing materials are often not factored into the quotation phase of a project. This can result in panic at the end of a project which can be prevented by involving us as early as possible in the process. We are happy to advise and help the project run as smoothly as possible.
A good example is that we think along with our customers about the proper bracket distance. In practice a wider bracket is often used to reduce the costs of material.
However, if it turns out that the piping bends because there is too much distance between the two brackets, the quality will suffer. This is also the case when expansion points and fixed points are ‘forgotten’ or when other installations ‘are in the way’. We happily consider these things with you.
You also prevent failure costs due to the fact that our quality products are tested according to the stringent requirements of RAL and are subsequently RAL certified. You can therefore rely on guaranteed quality. In addition, we produce our products in-house and we randomly test them according to the same stringent requirements.
Do you want to avoid unnecessary costs and delays? Contact our experts for tailored advice and support from the earliest project stages.
