Tangit FP 550 2C Fire Protection Foam

Tangit_Firesafety
  • for fire-proof and smoke-proof sealing of partitions for pipes, cables and combinations
  • also for light partition walls greater than 10 cm thick
  • fire-proof and gas-tight for at least 90 minutes

Additional Specifications

Specifications and Packaging

Part No.ColourCont.Pack 1
Part No.2181550ColourPinkCont.300 mlPack 16
2181550_FP_550_MG1_T

Product Specifications

  • for fire-proof and smoke-proof sealing of partitions for pipes, cables and combinations
  • also for light partition walls greater than 10 cm thick
  • fire-proof and gas-tight for at least 90 minutes
  • reliable and automatic filler for a wide variety of partitions
  • user friendly for instructed first time users
  • discard the initial material (about 3 strokes) until the components are being thoroughly mixed
  • the cartridge can be closed again once the opening has been cleaned
  • always apply with Tangit 2C Pistol PP6
  • excellent and economical foam yield (approx. 3.5 litres)
  • legislatively safe
  • rapid hardening: can be cut after approx. 4 minutes; fully hardened after approx. 20 minutes
  • tested according to EN 1366-3
  • compliant with DIN 4102 and MLAR 2005/LAR/RbALei
  • flame-retardant as per DIN 4102 (B1)
  • replacement mixing tubes are available (Tangit FP 504 Spare Mixer Pack)
  • for further information please refer to our other technical documents

Complementary Products

Complementary products for Tangit FP 550 2C Fire Protection Foam

  • 215XXXXXX_BIS_Pacifyre_MK_II_P

    Pacifyre® MK II Fire Sleeve (P)

    • for pipe penetrations in accordance with e.g. DIN 4102-11 or DIN EN 1366-3 in walls (solid walls or light partition walls) and ceilings with fire protection requirements
    • the sleeve provides a guaranteed protection against fire, smoke and noise
    • expansion and contraction of the pipe remains possible

    For more information

  • Tangit_FP_800_2181801

    Tangit FP 800 Fire Protection Coating

    • Tangit FP 800 Fire Protection Coating is an integral part of the Tangit FP 550 2C Fire Protection Foam system
    • for final coating of partitions for pipes and cables and combination partitions with Tangit FP 550
    • for coating cables, cable bundles and cable trays to stop fire spreading

    For more information

  • Tangit_FP_504_2181504

    Tangit FP 504 Spare Mixer Pack

    • thorough mixing of the two components of Tangit FP 550 fire protection foam
    • as extra mixing tubes for emptying the remnants from opened Tangit FP 550 cartridges
    • specially designed for Tangit FP 550 2C Fire Protection Foam

    For more information

  • Tangit_PP6_2181526

    Tangit 2C Pistol PP6

    • application of Tangit FP 550 2C Fire Protection Foam
    • using two-component cartridges
    • European quality brand

    For more information

  • 2149999903

    Pacifyre® ID-Card

    • for identification of pipe penetrations sealed with Pacifyre® and/or Tangit products

    For more information

Show more results

Do you have a question?

Ask a question
Call us

Call us +31 297 23 30 00
Email us export@walraven.com

Close

Asia

Oceania

Or visit our international website.