Walraven VibraTek® MS-1 Spring Mount
high performance spring isolator for light equipment
Features
- recommended for equipment with low working speeds, from 700 rpm and above
- ribs in the metal base provide increased stiffness
- slot holes facilitate positioning and anchoring to the base material
- epoxy powder-coated base, caps and springs provide increased resistance to corrosion
- average ratio Kx / Kz = Ky / Kz = 1.0
- working temperature range -90 ˚C till 150 ˚C
Articles
| Product Number | Female Thread | Thread Type | Total Height | Total Width | Total Depth | Width | Fixing Slot | Heart To Heart Distance | Recommended Minimum Load Faz | Recommended Maximum Load Faz | Maximum Static Deflection | Saved articles list |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ref. letter | Tfem | TT | H | W | DtT | w | FS | k | ||||
| Unit desc. | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (N) | (N) | (mm) | |||
2800300050
|
M8 | Metric | 72 | 106 | 70 | 51 | 16x11 | 80 | 10 | 45 | 25 | |
|
2800300150
|
M8 | Metric | 72 | 106 | 70 | 51 | 16x11 | 80 | 30 | 140 | 25 | |
|
2800300250
|
M8 | Metric | 72 | 106 | 70 | 51 | 16x11 | 80 | 50 | 230 | 25 | |
|
2800300500
|
M8 | Metric | 72 | 106 | 70 | 51 | 16x11 | 80 | 100 | 460 | 25 | |
|
2800300750
|
M8 | Metric | 72 | 106 | 70 | 51 | 16x11 | 80 | 150 | 690 | 25 | |
|
2800301000
|
M8 | Metric | 72 | 106 | 70 | 51 | 16x11 | 80 | 200 | 920 | 25 |
Downloads & certificates
Some documents are specific to an article. Select an article above to see all its downloads.
How can we assist?
Digital tools
Make planning, designing and specifying installation easier.
Engineering Services
From design calculations to installation guidance, our engineering services support every stage of your project.
Prefabrication & off-site services
Pre-assembled fixing systems ready for installation that reduce on-site labour, minimise waste and improve planning.
Technical Support & Advice
From an initial product question to support during installation, we are ready to help you move your project forward.
Feedback
If something doesn’t look right or if you have any suggestions, please contact us.
