Walraven Tangit FP550 2-C Fire Resistant Foam 300ml
sealing of penetrations
Features
- For fire-proof and smoke-proof sealing of partitions for pipes, cables and combinations
- Also for light partition walls greater than 10 cm thick
- Fire-proof and gas-tight for at least 90 minutes
- Reliable and automatic filler for a wide variety of partitions
- User friendly for instructed first time users
- Discard the initial material (about 3 strokes) until the components are being thoroughly mixed
- The cartridge can be closed again once the opening has been cleaned
- Always apply with Tangit 2C Pistol PP6
- Excellent and economical foam yield (approx. 3.5 litres)
- Aging resistant
- Rapid hardening: can be cut after approx. 4 minutes; fully hardened after approx. 20 minutes
- Tested according to EN 1366-3
- Compliant with DIN 4102 and MLAR 2005/LAR/RbALei
- Flame-retardant as per DIN 4102 (B1)
- Replacement mixing tubes are available (Tangit FP 504 Spare Mixer Pack)
Specifications
Identification
| Product Number | 2181550 |
|---|
Product Dimensions
| Total Height (mm) Ref. letter: H | 260 |
|---|---|
| Total Width (mm) Ref. letter: W | 50 |
| Total Length (mm) Ref. letter: L | 50 |
Technical characteristics
| Colour | Red |
|---|---|
| Volume (ml) | 300 |
| Material | Polyurethane (PUR) |
| Model | Fire protection foam |
Approvals & Declarations
| CE mark | No |
|---|---|
| European Technical Assessment (ETA) | No |
Weights
| Weight [g] (g) | 373 |
|---|---|
| Weight [kg] (kg) | 0.37 |
Packaging information
| Pack 1 Shape | Cardboard Box |
|---|---|
| Pack 1 Qty | 6 |
| Pack 1 Height (mm) | 274 |
| Pack 1 Width (mm) | 166 |
| Pack 1 Length (mm) | 119 |
| Pack 1 Weight (g) | 2290 |
| Pack 2 Shape | Pallet ISO 0-1/1 |
| Pack 2 Qty | 720 |
| Pack 2 Height (mm) | 966 |
| Pack 2 Width (mm) | 1200 |
| Pack 2 Length (mm) | 800 |
| Pack 2 Weight (g) | 295800 |
| Pack 3 Shape | No Pack Type Available |
How can we assist?
Digital tools
Make planning, designing and specifying installation easier.
Engineering Services
From design calculations to installation guidance, our engineering services support every stage of your project.
Prefabrication & off-site services
Pre-assembled fixing systems ready for installation that reduce on-site labour, minimise waste and improve planning.
Technical Support & Advice
From an initial product question to support during installation, we are ready to help you move your project forward.
Feedback
If something doesn’t look right or if you have any suggestions, please contact us.
