Walraven Rail Beam Clamp WM3 zp M8
fixing to steel beam
Features
- for a solid fixing to steel construction without the need for welding or drilling
- always use 2 beam clamps per fixing
- material: steel
- zinc plated
Specifications
Identification
| Product Number | 6585003 |
|---|
Product Dimensions
| Clamping Range (mm) Ref. letter: CR | 1 - 20 |
|---|---|
| Total Height (mm) Ref. letter: H | 126 |
| Total Width (mm) Ref. letter: W | 80 |
| Total Length (mm) Ref. letter: L | 62 |
| Thread Size Ref. letter: TS | M8 |
| Thread Length (mm) Ref. letter: TL | 118 |
| Width (mm) Ref. letter: w | 50 |
| Material Thickness (mm) Ref. letter: MT | 4 |
Technical characteristics
| For Rail Type | 50x40 |
|---|---|
| Torque Moment For Installation (Nm) Ref. letter: Tinst | 15 |
| Material | Steel |
| Material Quality | St. 1.0332 |
| Surface Protection | Zinc Plated |
| Surface Treatment | Untreated |
Safeloading
| Maximum Allowed Load Faz (N) Ref. letter: Fa,z | 3300 |
|---|
Weights
| Weight [g] (g) | 312 |
|---|---|
| Weight [kg] (kg) | 0.31 |
Packaging information
| Pack 1 Shape | Cardboard Box |
|---|---|
| Pack 1 Qty | 50 |
| Pack 1 Height (mm) | 184 |
| Pack 1 Width (mm) | 270 |
| Pack 1 Length (mm) | 404 |
| Pack 1 Weight (g) | 15986 |
| Pack 2 Shape | Pallet ISO 0-1/1 |
| Pack 2 Qty | 2250 |
| Pack 2 Height (mm) | 1064 |
| Pack 2 Width (mm) | 1200 |
| Pack 2 Length (mm) | 800 |
| Pack 2 Weight (g) | 740370 |
| Pack 3 Shape | No Pack Type Available |
Downloads & certificates
How can we assist?
Digital tools
Make planning, designing and specifying installation easier.
Engineering Services
From design calculations to installation guidance, our engineering services support every stage of your project.
Prefabrication & off-site services
Pre-assembled fixing systems ready for installation that reduce on-site labour, minimise waste and improve planning.
Technical Support & Advice
From an initial product question to support during installation, we are ready to help you move your project forward.
Feedback
If something doesn’t look right or if you have any suggestions, please contact us.
