Walraven Wall Plate CO2 Welded (BUP1000)
fixing to wall or ceiling
Features
- fixings to wall, ceiling or floor (tension and bending loads allowed)
- slots at 90° to each other to simplify fixing
- with CO2 welded connection nut
- material: steel
- product is part of the Walraven UltraProtect® 1000 system
- suitable for in- and outdoor applications
- stands min. 1,000 hours salt spray test (max. 5% red rust) according to ISO 9227
Articles
| Product Number | Connection Thread | Total Height | Total Width | Total Length | Material Thickness | Fixing Slot | Fixing Slot 2 | Heart To Heart Distance | Maximum Allowed Load Faz | Saved articles list |
|---|---|---|---|---|---|---|---|---|---|---|
| Ref. letter | G | H | W | L | MT | FS | FS 2 | k | Fa,z | |
| Unit desc. | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (N) | ||
67198016
|
M16 | 20 | 38 | 145 | 4 | 30x11 | 25x11 | 100 | 6000 | |
|
67198021
|
G½” | 22 | 38 | 145 | 4 | 30x11 | 25x11 | 100 | 4000 | |
|
67198033
|
G1” | 27 | 38 | 145 | 4 | 30x11 | 25x11 | 100 | 5500 |
Downloads & certificates
Some documents are specific to an article. Select an article above to see all its downloads.
How can we assist?
Digital tools
Make planning, designing and specifying installation easier.
Engineering Services
From design calculations to installation guidance, our engineering services support every stage of your project.
Prefabrication & off-site services
Pre-assembled fixing systems ready for installation that reduce on-site labour, minimise waste and improve planning.
Technical Support & Advice
From an initial product question to support during installation, we are ready to help you move your project forward.
Feedback
If something doesn’t look right or if you have any suggestions, please contact us.
