Walraven Ursus Foot BUP 250mm
Floor console damping base for air conditioning and heat pump
Features
- for supporting small pipework systems, ductwork runs and cable trays
- to support climate installations, walkways on flat roofs, etc.
- does not penetrate the waterproof membrane (at PVC roofs a separating layer must be installed to protect against plasticizer migration - see Walraven Walraven Yeti® Triplex Separation Layer)
- material: vulcanized rubber 100% recycled material, black; strut channel made of steel 1.0242
- UV resistant
- product is part of the Walraven UltraProtect® 1000 system
- suitable for in- and outdoor applications
- Walraven RapidStrut® Rail: surface protection:
- stands min. 1,000 hours salt spray test (max. 5% red rust) according to ISO 9227
- For a detailed calculation and for support how to spread the load please contact Walraven Technical Support.
- In cases where a foot is used in roof applications, the installer is obliged to verify maximum load capacity of roof before installation.
Specifications
Identification
| Product Number | 67687250 |
|---|
Product Dimensions
| Total Width (mm) Ref. letter: W | 130 |
|---|---|
| Total Length (mm) Ref. letter: L | 250 |
| Total Height (mm) Ref. letter: H | 50 |
Technical characteristics
| Material | Rubber |
|---|---|
| Surface Protection | Untreated |
| Surface Treatment | Untreated |
Approvals & Declarations
| ISO 10140-1 test report | No |
|---|---|
| ISO 10140-3 test report | No |
| ISO 16474-3 test report | No |
Safeloading
| Maximum Load (N) | 1000 |
|---|
Weights
| Weight [g] (g) | 1310 |
|---|---|
| Weight [kg] (kg) | 1.31 |
Packaging information
| Pack 1 Shape | Unpacked |
|---|---|
| Pack 1 Qty | 1 |
| Pack 2 Shape | Pallet ISO 0-1/1 |
| Pack 2 Qty | 400 |
| Pack 2 Height (mm) | 1050 |
| Pack 2 Width (mm) | 1200 |
| Pack 2 Length (mm) | 800 |
| Pack 2 Weight (g) | 544000 |
| Pack 3 Shape | No Pack Type Available |
Downloads & certificates
How can we assist?
Digital tools
Make planning, designing and specifying installation easier.
Engineering Services
From design calculations to installation guidance, our engineering services support every stage of your project.
Prefabrication & off-site services
Pre-assembled fixing systems ready for installation that reduce on-site labour, minimise waste and improve planning.
Technical Support & Advice
From an initial product question to support during installation, we are ready to help you move your project forward.
Feedback
If something doesn’t look right or if you have any suggestions, please contact us.
