 Indoor electrical fixings

Fast and reliable installations

Fast, reliable first-fix solutions for securing cable, conduit, containment, threaded rod and electrical boxes across the building structure.

View products

Case studies

 Are electrical installations complex?

Electrical first fix rarely happens on one type of surface. Services may need to run from structural steel and roof purlins, below steel decking, through stud walls and finally onto walls, ceilings or support channel.

Walraven combines purpose-made Britclips® spring-steel fixings with the RSWB adjustable bracket and the starQuick® clamp system. This provides installers practical ways to support electrical services without turning every fixing point into a custom detail.

Choose by substrate

Selecting the correct family of products begins with the structure you are fixing your installations to. Then confirm the supported service and connection method.

Structural steel: beam clips & clamps

Fix directly to a beam flange without welding or drilling. Choose from standalone clips or combinations prepared for cable ties, conduit, threaded rod and light-duty cable tray support

Roof purlins: profile specific hangers

Support services from vertical, Z-shaped, angled or 90-degree purlin profiles. Options are available for threaded rod, chain, hooks and direct service fixing.

Decking: hangers dovetail fixings

Use wedge nuts or deck hangers where threaded rod suspension is required, or dovetail cable fixings for quick cable and conduit runs. Always match the fixing to the exact deck profile.

Applications for building installations 

Mount electrical boxes

The Walraven RSWB (Rapid Sliding Wall Bracket) is an extendable galvanised-steel support for fast positioning of electrical boxes and conduit between wood or metal studs and floor joists.

Two adjustable length ranges
Multiple mounting depths
Can fit wood or metal framing

*RSWB is intended for mounting electrical boxes, conduit and similar services. It is not designed as a load-bearing support bracket

Clip conduit and pipe runs

Walraven starQuick® is a self-closing plastic clamp for conduit and lightweight pipework. It can be reopened by hand and combined with accessories for direct fixing, support rail, strut or threaded rod.

Sizes from 10 to 65 mm
Single or multiple runs
Electrical and plumbing application

Check before you specify

Confirm the substrate

Identify the beam flange, purlin, deck profile, studwork, wall, ceiling or support system.

Define the connection

Decide whether the service needs direct clipping, cable tie, saddle, threaded rod, hook or chain.

Verify the article

Check dimensions, orientation, maximum allowed load and installation instructions for the exact product.

Check project requirements

Confirm environmental exposure, fire-safety needs, local rules and market-specific product availability

How can we assist?

Walraven starQuick® Clamp (Grey)

for securing conduits and pipes to walls, floors, or ceilings

C0505

Walraven starQuick® Clamp (Copper Colour)

for securing conduits and pipes to walls, floors, or ceilings

C0512