Gulvvarme

Gulvvarme

11 resultater fundet: Filter
  • 3915001

    BIS Protection Plate

    • to protect hidden pipework after pouring processing floor
    • protection of plastic pipes from screws or nails
    • materiale: stål

    Mere information

  • 3913XXX

    BIS Dobbeltrørbærer

    • sammenhængende u-beslag
    • rørbærer for montering af varmerør i gulvet, før det bliver støbt i beton
    • øget styrke ved hjælp af profilens form

    Mere information

  • 6900000-6330018

    BIS Shouldered Masonry Nail for BIS Floor Clamp

    • Art.nr. 633 0 018: can be hammered into concrete without pre-drilling a hole
    • Part No. 690 0 000: with hand protection and ergonomic hand grip
    • Art.nr. 633 0 018: materiale: stål 1.1740, tempered

    Mere information

  • 394400X

    BIS Manifold Fixing

    • materiale: stål
    • elforzinket
    • sound proofing lining made of natural rubber, black

    Mere information

  • 087200X

    BIS Floor Bend

    • protects the pipe against mechanical damage ('buckle')
    • for pipe sleeve up to Ø 25 mm
    • materiale: PP (polypropylen), creamcoloured (according to RAL 1013)

    Mere information

  • 08720XX

    BIS Bend Guider

    • to make 90° corners with plastic floorpipes
    • pipe guidance corresponding prescribed bending radius 5xD
    • smooth finish: pipe can be fixed without damage

    Mere information

  • 0872005

    BIS Protective Pipe

    • Art.nr. 087 2 005: one-part protective sleeve (L = 1m)
    • Art.nr. 087 2 007 and 087 2 016: two-part protective sleeve (L = 15 cm)
    • protects pipe between floor bend and radiator against mechanical damage and UV-radiation

    Mere information

  • 06900XX

    BIS PE Flexible Pipe Sleeve

    • protective sleeve
    • for all types of pipe, in wall ducts or in concrete
    • material: LDPE (low-density polyethylene), white

    Mere information

  • 0872813

    BIS Two-Part Floor Bend

    • two-part floor bend
    • protects the pipe against mechanical damage ('buckle')
    • for pipe sleeve up to Ø 25 mm

    Mere information

  • 6930001-08701XX

    BIS Tacker System

    • the BIS Tacker system consists of wide and stable clamps and a problem free tacker device
    • Art.nr. 693 0 001: Tacker device for a quick processing of tacker clamps (KA8 and KAL)
    • Art.nr. 087 0 141 (type KA8): for insulating plates from 25 mm thickness with foil

    Mere information

  • 08702X0

    BIS Tacker Clamp

    • for a manual fixing of floor pipe to profiled plate or rails e.g. Raufix® on isolation plate
    • for floor pipe up to Ø 20 mm
    • can be used in addition to burled plates near manifolds, pipe bends and damaged plates

    Mere information

Lad os tage kontakt

Produkt ønskeliste 0
Til toppen
Close

Oceania

Or visit our international website.