SanTec Inside Urinal Siphon
Smart and invisible
The contact-free SanTec Inside urinal flushing system is invisible to the user and offers optimum vandalism resistance and maximum design flexibility.
Inside does not require a minimum distance in relation to an opposing or adjacent wall and is therefore very suitable for small spaces.
Inside does not require a minimum distance in relation to an opposing or adjacent wall and is therefore very suitable for small spaces.
Simple installation and saves water
The intelligent Inside sensor siphon is very easy to install and adjusts automatically again and again to the use environment. Flushing is interrupted immediately in the event of blockage. An interim hygiene flush will prevent drying out of the siphon and thus arisal of any unpleasant odour.
Because flushing is only activated by direct use, SanTec Inside is also highly economical as regards water use.
The advantages clearly set out
- Vandalism resistant
- With evaporation protection
- Flush stop in case of blockage
- Reliable with 4 sensors
- Highly suitable for small spaces
- Water saving: only flushes after use
- Installed and ready to use in a few minutes
- Maximum lay-out freedom: no minimum distance required
SanTec Inside Sensor Siphon
Complete kit (Product no. 035 1 348) consisting of:
- SanTec Inside Sensor Siphon, electronics and magnetic valve
SanTec Inside Sensor Siphon
- Power supply: 230 V / 50 Hz
- Consumption: approx. 3 VA (stand-by), approx. 8 VA (during flushing)
- Magnetic valve: 24 V / 50Hz
- Flush time (main flush): 1–10 seconds (adjustable)
- Water pressure: 0.5–6 bar
- Flow rate: 0.3 to 0.7 litres per second (can be reduced in compliance with DIN 3256)
- Water connection: 1/2"
- Suitable for: horizontal outflow urinals
- Laufen Taro Nova only with siphon adapter (Product no. 035 1 349)
The ideal solution
In combination with the fully pre-fitted BISMAT® UR wall-hung system, the San Tec is the ideal total solution for situations where vandalism resistance, water saving and design flexibility are a priority requirement.
BISMAT® UR Inside pre wall system in the catalogue.
Click here to return to the overview of SanTec contactless flow and flush systems
Click here to return to the overview of SanTec contactless flow and flush systems
